Hardware

Jam Nuts

Jam nuts are thin nuts that are assembled with regular nuts to lock both nuts in place. The jam nut helps prevent loosening by providing extra resistance.

Grounding Straps

Grounding straps are designed as an electrical grounding connection between two terminals.

Coupling Nuts

Coupling nuts are long nuts used to connect pieces of threaded rod or other male threaded fasteners.

Connecting Links

Connecting links are a vital hardware component to a functioning tension mounting assembly or other suspended weighing system assembly.

Leveling Pads

Leveling pads adapt to most floor scales and are available in cadmium plated steel or stainless steel.

Static-safe Service Kit

The Static-Safe Service Kit removes static that can damage sensitive equipment especially during board replacement. This compact kit transports easily for field service

Eye Nuts

Eye nuts are designed to be screwed onto various lengths of threaded stock or bolts.

Floor Scale Base

Floor scale mounting plates fit most floor scale foot assemblies and are available in stainless or mild steel.

Cord Grip Assemblies

Cord grip assemblies made of weather- and corrosion-resistant nylon include cord grip, locknut, O-ring seal, and gray and black reducer glands.

Static Control Wrist Strap

The static control wrist strap is the single most important personal accessory for protecting ESD sensitive components and circuits.

Load Cell Eye Bolts

A bolt with a circular ring on the head end. Can be used in conjunction with connecting links to suspend S-beam load cells.

Ball Bearings

Ball bearings are used with load cup and load receivers to build custom scales.

Crimper and Lead Seals

Lead and wire seals are often used with small diameter openings such as drums, hoppers and valves.

Captured Ball Floor Scale Leveling Feet

Stainless steel and carbon steel captured ball floor scale leveling feet provide outstanding accuracy, repeatability and performance with active ball suspension providing optimum load cell performance.

Leveling Mount

Leveling mounts are designed for use with some floor scales or machinery platforms.

Load Cell Conduit Adapters

Load cell conduit adapters, made of 303 stainless steel, are used to adapt conduit to load cells.

Wire Rope

Wire rope assemblies provide better alignment and greatly increase load cell repeatability. In addition, they act as natural vibration dampeners. Custom wire ropes are available for your specific applications.

Weldless End Links

Weldless end links are composed of forged carbon steel and are available self-colored or hot-dip galvanized.

Surefoot™

Use Surefoot™ with single-ended beams to provide a large, flat, adjustable introduction surface. Surefoot adapts to most floor scales.

Bench Scale Feet

Bench scale feet are made with 1/4-20 UNC and 3/8-16 UNC threads.

EL215 Cable Splicing Kit

EL215 cable splicing kit is designed for use in weather-exposed or direct-burial locations and contains plastic splicing tube, circuit board, insulating resin and instructions.

Rod End Ball Joints

Where a flexible connection is required, rod end ball joints always have a spherical ball that may or may not be fitted with a stud.

EL214/EL214T Cable Splicing Kit

EL214/EL214T cable splicing kit is designed for a complete, professional transducer cable splice and prevents moisture from entering the load cell through the cable connector.

Static Shielding Bags

The static shield bag offers total ESD protection, with the outer layer of the bag consisting of an abrasion-resistant polyester and the anti-static polyethylene inner layer retarding triboelectric static charging from inside the bag.

Load Receiver Plate

Use in conjunction with ball bearings and load cups to build a custom scale for custom applications. This receiver has a built-in self-centering effect, and the stainless steel construction withstands wear.

USB to Serial Converter/Adapter

Use the converter for serial conversion from your USB device. Lightning-fast data transfer rates come from a simple plug-and-play setup.

Threaded Adapters

Threaded adapters are primarily used to couple isolators with load cells. Jam nuts are included for coupling.

Load Cups

Choose from a variety of sizes and dimensions, even replacements cups for specific load cells. These are used with ball bearings and load receivers.

T-strip/T-grip Molding

Use T-Strip/T-Grip molding to seal the cracks around your pit-type truck scale to prevent gravel and debris from entering the pit.

Connectors, Shell Plugs and Receptacles

For quick, secure cable connectors, MS-type connectors with shell plugs and receptacles.

Clevis Mount Assemblies

Coupling nuts are long nuts used to connect pieces of threaded rod or other male threaded fasteners.

ITCM Hardware Kits

The ITCM Isolated Tension Cell Mount is a mounting assembly designed for tension mounting S-beam load cells in suspended hopper assemblies and mechanical scale conversions.

Load Button

Load buttons are for use with various load cells. Choose from a variety of dimension options in load cell buttons.

Spherical Washer Sets

Spherical washer sets are available in various sizes and dimensions.

Leveling Pad Stems

Leveling pad stems are used with leveling pads and one jam nut is included.

Load Cell Spacers

Optimize your load cell performance with a load cell spacer. Load cells require a flat mounting surface to perform correctly. Choose from stainless steel or mild steel construction for mounting your load cells.

RoughDeck® Scale Base

RoughDeck scale base mounting plates secures RoughDeck and other popular floor scales by preventing movement in horizontal planes.

Flintec™ Adjustable Rubber Foot

The Flintec low-profile, adjustable rubber foot is designed for platform scales containing a Flintec SLB load cell.

Polyurethane Rubber Leveling Feet

Polyurethane rubber leveling feet are heavy-duty, low-cost replacement feet with a stainless steel stem for corrosion resistance.

Summit® 3000 Scale Base

Summit 3000 scale base mounting plates are for Summit 3000 floor scales and are available in mild steel.

Load Cell Isolators

Power surges such as those caused by welding or electrical shorts frequently damage load cells and indicators. To prevent such damage, these isolators electrically separate the mechanical assembly from its tension-type load cell.

Industrial Corrosion Inhibitor

The industrial indicator corrosion inhibitor protects up to five cubic feet of enclosure, ensuring equipment continues to function properly.